1 / 6
Lucy, Terror of the Street – Small and Big (Formeláks) / Lucie - postrach ulice - Malej a Velkej (Formelaci) — zdjęcie 1
1 / 6

Lucy, Terror of the Street – Small and Big (Formeláks) / Lucie - postrach ulice - Malej a Velkej (Formelaci)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Print the legendary clay figures from the beloved Czechoslovak films. This set contains both models (the green "Small" a

Ocena
0 / 5
Polubienia
3
Pobrania
14
Wydruki
0
Wyświetlenia
53
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

Lucy, Terror of the Street – Small and Big (Formeláks)

Print the legendary clay figures from the beloved Czechoslovak films. This set contains both models (the green "Small" and the orange "Big"), which will delight any fan of classic children's comedies.

About the films and characters

Lucy, Terror of the Street (Czech: Lucie, postrach ulice, German: Luzie, der Schrecken der Straße) and its sequel ...And There is Lucy Again! (Czech: ...a zase ta Lucie!, German: ...und wieder wird es Luzie!) are cult family comedies from 1984, directed by Jindřich Polák. The story follows a little preschooler, Lucy, who is desperately trying to fit into a gang of older boys led by the mischievous Oswald. During a "test of courage," she takes a box of magical molding clay from a department store.

From this magical clay, two naughty figures come to life in her hands – a larger orange one and a smaller green one. These characters can freely change their shape, become Lucy's secret allies, and help her outsmart the boys' gang. With their transformations, pranks, and constant craving for goodies, they cause a series of humorous and crazy situations in the neighborhood.

Recommended print settings

Layer height: 0.2 mm
Infill: 8% Gyroid
Walls: 2
Supports: Organic (Tree/Organic)
Printing and finishing notes

The printing of the models has been extensively tested on A2L, X2D, and H2S printers.

The eyes of the characters can be printed separately by color (black and white parts) and easily secured into the model using cyanoacrylate (CA) super glue. Alternatively, it is possible to print the eyes fully assembled in place using an AMS or a similar unit for multi-color printing.

Layer height: 0.2 mm
Infill: 8% Gyroid
Walls: 2
Supports: Organic (Tree/Organic)
Printing and finishing notes

The printing of the models has been extensively tested on A2L, X2D, and H2S printers.

The eyes of the characters can be printed separately by color (black and white parts) and easily secured into the model using cyanoacrylate (CA) super glue. Alternatively, it is possible to print the eyes fully assembled in place using an AMS or a similar unit for multi-color printing.

Tagi