Ikea Lival Lamp Arm Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
So I have had an old discontinued Ikea Lival Lamp lying dormant for years as the articulated arm to clamp base snapped…
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 40
- Wydruki
- 1
- Wyświetlenia
- 243
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
So I have had an old discontinued Ikea Lival Lamp lying dormant for years as the articulated arm to clamp base snapped as it was just thin stamped metal.
So i finally got round to modelling and printing a replacement.
I have included the Fusion 360 file and a STEP file if anyone wants to mod.
You will either need longer than original M4 bolts
or
6x4 threaded inserts (for M4) you can melt into one side of the base having widened the holes accordingly. This should allow you to use the oroginal bolts.
Print Settings
Printer:
Elegoo Neptune2
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
100
Filament:
3DQF PLA
Colour Fade Black
Notes:
Lay model flat so the round peg is on the print bed and the arm holes are highest area on Z axis for addit strength.
Category: Replacement Parts