Voron 0 Bed plate linear extrusion bedslinger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This fits in the V grooves of a 2020 extrusion making a custom linear rail with Voron 0 bed plate to make a bedslinger
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Remix of this model
I integrated the model basically a custom linear rail using a 2020 or 2040 as the rail and this model as the carriage into a Voron 0 bed plate to mount a 120mm Voron 0 bed and use it on a y axis for a custom bedslinger
PRINT RECOMMENDATIONS
ASA/ABS/PC, Carbon or Glass fiber PETG/ASA/ABS
8 perimeters, 5 top and bottom layers, 45% Gyroid infill
BUILD INFO/TIPS/NEEDED HARDWARE
MR105 ball bearing 8pcs - use Nylon/POM bearings if you can. Steel ones only for testing.
M5x12 screw 8pcs - use low profile head as on the pictures.
M3x5 heat insert 4pcs
M3x10 screw 2pcs
First clean the print - there are some bridges that don't print perfectly. When installing bearings, screw the screws slowly and carefully so you don't split the piece but as the screw holes are under 45° to the layer lines it shouldn't split. Install heat inserts in the 4mm holes. M3x12 for Belt Clamps
After inserting the belt ends in belt fasteners you need to cut off the crimped ends, but then you can't use it with the stock plate if you want to go back - I prefer using new belt.
Clean the extrusion before using/installing the slider