1 / 10
Kantrael pattern Lasgun cosplay prop (updated) — zdjęcie 1
1 / 10

Kantrael pattern Lasgun cosplay prop (updated)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

2 versions : - cut for smaller printers (P1S) - cut for larger printers (Neptune 4 Max)

Ocena
0 / 5
Polubienia
2
Pobrania
15
Wydruki
0
Wyświetlenia
97
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Hello, as my third model, I’m sharing an updated version of my Lasgun. The model is reinforced with three PVC pipes: 16mm, 20mm, and 25mm. I’ve divided the lasgun into prints for small and large printers—the 256 is for small printers and the 420 is for large ones. Additionally, I’m including the full model in case you’d like to cut it yourself.

So, to build this prop, you’ll need to purchase:

  • PVC tube 16mm / 1m,

  • PVC tube 20mm / 1m,

  • PVC tube 25mm/ 1m,

  • (optional) 8x 35mm wood dowels

P.S. The hole tolerance are specific to my printer and tubes, so if it doesn’t fit, let me know and I’ll modify the model and send it to you.

Tagi