CTC feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After using the Spring based anti-vibartion feet for a while I wasn't too pleased with the result. To my opinion using…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
After using the Spring based anti-vibartion feet for a while I wasn't too pleased with the result. To my opinion using the springs the machine is rather instable and shakes all the time especially when the head makes short movements. I think that because of the springs this "shaking energy" stays in the machine rather than being transferred away from the machine.
For this reason I created my own feet that raises the machine 30 mm and has a larger support area for the machine. I've been using them for a short while and I think the machine is much more stable. At least, it doesn't dance around anymore like with the spring-based feet. Adding some padding even makes them quiet as well.
You need the same feet for all 4 corners.
Print Settings
Printer:
CTC Bizer Dual
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Notes:
No need for supports. I created some solid support grid inside the feet (see print photo) so weight of machine is divided equal.
Category: 3D Printer Parts