1 / 2
Skull Buddy (Based) — zdjęcie 1
1 / 2

Skull Buddy (Based)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This model is a purely decorative 3D printed object, designed as a display piece.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
3
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Sculptures
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Description:

This model is a purely decorative 3D printed object, designed as a display piece. The model consists of two separate parts that require assembly after printing.

Printing & Assembly Instructions:

  • Assembly: The model is split into two components. For a seamless finish, use a suitable adhesive (such as super glue/CA glue) to join the parts at the designated connection points.

  • Print Settings:

    • Layer Height: 0.16mm (or 0.14mm for higher detail).

    • Infill: 10-15% is sufficient, as the piece is intended for display purposes only.

    • Supports: [Insert your preference here, e.g., "Supports are required for the complex sections," or "The model is designed to be printed without supports."]

    • Material: Tested with PLA

Tagi