1 / 1
Cutting disc blade for Navimow X series X420 X430 X450 — zdjęcie 1

Cutting disc blade for Navimow X series X420 X430 X450

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cutting disc blade for Navimow X series

Ocena
0 / 5
Polubienia
1
Pobrania
62
Wydruki
0
Wyświetlenia
448
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Cutting disc blade for Segway Navimow X series. Consist of two parts for easier printing without support.

You will need 12 M4x20 hex screws and 18 M4 nuts. You can use original segway blades. When printed, holes for blades will be blocked by one sacrifical layer, so there is no need for supports, just poke it with 4mm or similar drill bit or blade.
This is still under testing printed in PA6CF

EditV2: Added dots for three screws, to identify screws that holds disc and beefen up blade holders

Tagi