Christmas (Birthday/Donate) Sock Piggy Bank
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A nice gift for everybody. All the parts need to be assembled. And you need a sock, so the money can be poured in....…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 275
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A nice gift for everybody. All the parts need to be assembled. And you need a sock, so the money can be poured in....
There are three cross bars of which you need at least one. Cross bars come in blanks, but also with "Happy Birthday" and "Merry Christmas". I will add some more in the future.
You need two stands and just one of all the other parts.
Update 26-11-2016:
I replaced the stand for a version with a wider opening for the cross-bar for easier assembly.
Update 12-02-2017:
Added "Please Donate" cross-bar
Print Settings
Printer:
CTC Bizer Dual
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
.2 mm
Infill:
20%
Notes:
I printed it using my preferred material PETG. I didn't use any supports and kept infill at 20%. However, when using the more transparant PETG I would use 100% infill for the cross bars with text to increase contrast.
It's not a quick print when you need a gift urgently; all in all it takes my printer around 6 hours for all parts. (printer set @45mm/s)
Don't forget a sock.
Category: Construction Toys