Alternative Barrel Covers for the Xtra Atrox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Unofficial Barrel Covers for the Xtra Atrox
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After seeing Joker of Doom's Faux Suppressor get remixed, I started working on my own remix that relies on the threaded barrel of the Atrox instead of being an insert.
As part of that effort, I remixed these as the base for said barrel attachment. I figured I'd release them both here so folks can go wild with their own ideas or just get another replacement for their barrel cover.
Some Notes:
The loose barrel fit uses the threading from @jcworks's model, while the tight barrel fit uses the M18x1 threading pulled from @Fargo1's model.
The full model has threading throughout the entire cover, while the mid model copies the original Xtra barrel cover's design and only has threading in the middle.
If you're using one of these as the base for a barrel attachment, I'd recommend the tighter fit as it'll be much more secure when putting it on there.
If doing so, I'd recommend applying a thin line of lube (I used Slug Slym) on the threads of the barrel and then working the barrel cover onto the threads slowly to break them in. (Thanks to @JokerofDoom_1410209 for that advice on his faux suppressor!)