Case for hearth rate monitor - chest strap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small box for a hearth rate chest strap. It has ventilation holes so any moisture on the strap can…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a small box for a hearth rate chest strap. It has ventilation holes so any moisture on the strap can evaporate.
It was designed to fit this strap https://s.click.aliexpress.com/e/_c3NkEI6l or on amazon https://amzn.to/4AnXtFo (affiliate links) but it is probably compatible with many more.
If you are going to place it on a flat surface I recommend glueing four of these silicone pads on the bottom to leave room for air flow: AliExpress: https://s.click.aliexpress.com/e/_c3nHzr6F or Amazon: https://amzn.to/4i636kX
Found this 3D file useful?
You can support my work by making a purchase through one of the affiliate links below. You can buy anything you like from the store after opening the link, it doesn't have to be the products linked here. I receive a small commission from eligible purchases, at no extra cost to you. Thank you!
Amazon: https://amzn.to/4ym4rce
AliExpress: https://s.click.aliexpress.com/e/_c4SxCwcl
This 3MF was created with the Elegoo Centauri Carbon 2 profile in Elegoo Slicer (OrcaSlicer). If you're using a different printer or slicer, import the 3MF as a model only to avoid incompatible printer settings.