Big 1/4" screwdriver bit handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a big handle for ¼" screwdriver bits. I recommend printing with 3 or more perimeter walls for increased…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a big handle for ¼" screwdriver bits.
I recommend printing with 3 or more perimeter walls for increased strength.
I designed this handle for the longer 100mm bits like these https://s.click.aliexpress.com/e/_c3rRwTAl or on amazon https://amzn.to/4hipgyg (these are affiliate links)
The hex hole is slightly tapered so it holds the bits very well.
Found this 3D file useful?
You can support my work by making a purchase through one of the affiliate links below. You can buy anything you like from the store after opening the link, it doesn't have to be the products linked here. I receive a small commission from eligible purchases, at no extra cost to you. Thank you!
Amazon: https://amzn.to/4ym4rce
AliExpress: https://s.click.aliexpress.com/e/_c4SxCwcl
This 3MF was created with the Elegoo Centauri Carbon 2 profile in Elegoo Slicer (OrcaSlicer). If you're using a different printer or slicer, import the 3MF as a model only to avoid incompatible printer settings.