CR10 Max USB cable protection cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is the CR10 Max USB cable protection cover preventing the USB cable form being pulled out unintentionally. Its…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 326
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Here is the CR10 Max USB cable protection cover preventing the USB cable form being pulled out unintentionally.
Its bolted to the case from the bottom with a M3x10 screw using the existing thread. Just undo the bolt and use a little longer one to secure the cover. If you want you can also use a double sided sticky tap on the flat spots on top and bottom of the cover for further stability.
Print Settings
Printer:
SecKit SK-Tank
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0,2
Infill:
50
Filament:
Sunlu PETG
Grey How I Designed This ===================
FreeCAD
Model included
Category: 3D Printer Accessories