Bearing-equipped spool holder for Anycubic
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bearing-equipped reel holder consisting of three parts: a support arm, a roller, and a locking mechanism.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I created this project a few years ago.
I modified the excellent Thin Spool Holder for the Anycubic i3 Mega, designed by kurioso, and adapted it for use with the FLSun SR. I used it for a while until I bought a SUNLU dryer box.
When I received the Anycubic as a gift, I adapted the design for it by modifying the mounting arm and the central shaft.
The spool lock is the Universal Spool Holder by HYPER3D; You will have to download the lock from the creator's link.
The bearing-equipped roller is my own design. Combining all the parts resulted in a well-functioning assembly.
I printed all parts in PETG with a 0.2mm layer height and a 0.4mm nozzle.
It uses two 6804-2RS bearings.
ASSEMBLY
First, insert the bearings into the roller—being careful not to crack the plastic—until they bottom out or sit flush with the roller. Then, insert the shaft into the roller and attach the lock.
Finally, simply snap the support arm onto the right-hand upright of the Anycubic i3 and mount the assembly onto the support arm.