Tetromino Puzzle - 7 Pieces with 4 × 7 Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The seven tetrominoes (I, O, T, S, Z, J, L) in 15 mm squares and a 4 × 7 tray that fits them all.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The seven tetrominoes (I, O, T, S, Z, J, L) in 15 mm squares and a 4 × 7 tray that fits them all.
Pieces 6 mm thick, 0.2 mm offset
Tray 60 × 105 mm inside
Two plates
How it was checked
Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.
Print settings
A1 mini, 0.20 mm, PLA, no supports: 35 min, 22 g + 22 min, 19 g.
Parametric OpenSCAD source included: change the values at the top of the file.
About this design
Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Tetrominós con bandeja de 4 × 7. Sin soportes: 35 min, 22 g + 22 min, 19 g.
العربية
لغز التترومينو مع صينية.