1 / 2
Mancala (Kalah) Board — zdjęcie 1
1 / 2

Mancala (Kalah) Board

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mancala board with 2 × 6 pits and two stores. Play with 48 seeds, chickpeas or small marbles.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
14
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Mancala board with 2 × 6 pits and two stores. Play with 48 seeds, chickpeas or small marbles.

  • 167 × 66 × 14 mm

  • Pits Ø18, stores 50 mm long

  • Chamfered top edge

How it was checked

Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.

Print settings

A1 mini, 0.20 mm, PLA, no supports: 1 h 12 min, 53 g.

Parametric OpenSCAD source included: change the values at the top of the file.

About this design

Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.

Español

Tablero de mancala. Sin soportes: 1 h 12 min, 53 g.

العربية

لوح لعبة المنقلة.

Tagi