1 / 2
Teapot-Shaped Tea Bag Rest — zdjęcie 1
1 / 2

Teapot-Shaped Tea Bag Rest

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Small dish shaped like a teapot to rest a used tea bag. 2.5 mm deep so it does not drip on the table.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
6
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Small dish shaped like a teapot to rest a used tea bag. 2.5 mm deep so it does not drip on the table.

  • 94 × 58 × 5 mm

  • Spout, handle and lid knob

  • 15 minutes

How it was checked

Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.

Print settings

A1 mini, 0.20 mm, PLA, no supports: 15 min, 9 g.

Parametric OpenSCAD source included: change the values at the top of the file.

About this design

Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.

Español

Posabolsitas de té con forma de tetera. Sin soportes: 15 min, 9 g.

العربية

صحن صغير لكيس الشاي على شكل إبريق.

Tagi