Sock Rings (x10)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pass both socks through a ring before washing and they come out of the machine as a pair.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Pass both socks through a ring before washing and they come out of the machine as a pair.
Ø32 × 3 mm, Ø16 hole
Six drain holes so they dry
Ten on one plate
How it was checked
Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.
Print settings
A1 mini, 0.20 mm, PLA, no supports: 45 min, 16 g.
PETG survives hot washes better than PLA.
Parametric OpenSCAD source included: change the values at the top of the file.
About this design
Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Anillas para emparejar calcetines. Sin soportes: 45 min, 16 g.
العربية
حلقات لجمع الجوارب أثناء الغسيل.