Hanging Planter Ø110 (cachepot)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hanging cachepot for a nursery pot, with three rope ears that grow out of the wall at 45°. No drain hole: no drips.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hanging cachepot for a nursery pot, with three rope ears that grow out of the wall at 45°. No drain hole: no drips.
Ø110 top, 85 mm tall
Ears with Ø6 rope holes
Walls 2.2 mm
How it was checked
Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.
Print settings
A1 mini, 0.20 mm, PLA, no supports: 1 h 57 min, 78 g.
Put the plant in its nursery pot inside.
Parametric OpenSCAD source included: change the values at the top of the file.
About this design
Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Macetero colgante de 110 mm. Sin soportes: 1 h 57 min, 78 g.
العربية
أصيص معلق ١١٠ مم.