Ancillary Steam Frame Tracker Mount + Vive Face Tracker + Babble Tracker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use your vive or tundra trackers with your steam frame for playspace calibrator. Also mount your vive or babble ft.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 480
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
(If you find any of my models for sale online (ebay, amazon, etc) it is not me, i do not sell prints; especially not at those insane prices. They are all listed as non-commercial works. I do not have a patreon or kofi or any donation platform. These models are only listed here on printables, for free, for you to print or use a print service like PCBway or JLCPCB, or your friends.)
Use your vive or tundra trackers with your steamframe..
Also use your babble or vive face tracker.
For Playspace Calibrator Continuous calibration etc.
Locates the tracker towards the forehead to improve weight distribution.
Step file included for remixes
You will need:
1/4-20x 1/2" screw
m3x20mm bolt and nut for the face tracker version
Printing:
Print laying on its side with support
I suggest printing in PETG as the frame will exhaust heat on this plastic.
9/28/2026 Original Release