Letohrádek Hvězda — star-shaped building box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prague’s star-shaped palace as a storage box with a loose roof cover. Not suitable for travel packaging.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
A miniature storage box inspired by Letohrádek Hvězda in Prague, approximately 119 × 104 × 106 mm. Lift the roof to reveal a hollow six-pointed star. Red-and-white shutters, recessed windows and the entrance porch decorate the walls. The gallery shows a physical print, closed and open.
WARNING — loose cover, not travel packaging
The lid fits loosely and serves only as a cover. It does not lock or secure the contents; this box is not suitable as travel packaging. Keep it upright on a shelf or desk. Carry the body from underneath, never by the roof or finial.
Fun fact — a real star-shaped palace
Hvězda means “star” in Czech. The real Renaissance villa in Prague has a six-pointed star plan, which gives the building its name. Read about its history and see photographs of the real building in Wikipedia’s Letohrádek Hvězda article.
This miniature uses approximate proportions, not a surveyed scale replica. Some obscured side and rear window positions are inferred.
Materials and print settings
PLA throughout. Cream/white walls and chimneys, red shutters, dark grey or grey-green roof and windows, optional gold finial. Use the same polymer for all colour regions.
No hardware, magnets or glue.
0.4 mm nozzle, 0.2 mm layers, 3 walls, 5 top and bottom layers, 15% infill. Supports off; ironing off.
Keep the supplied orientation: body floor down, roof underside down and apex up. Keep XY scale at 100% to preserve the designed clearances.
Generic monochrome slicing estimates about 141 g PLA for the box and 18 g for both fit coupons. Actual consumption depends on your slicer and filament. AMS adds substantial purge; assigning one filament to all colour parts and painting the shutters saves material.
1. Test the locating fit
Print hvezda_coupon_body.stl and hvezda_coupon_lid.stl first. These are full-size, low-height samples of the joint. Lower the lid coupon onto the star-shaped tongue: it should seat and lift without force. The designed clearance is 0.25 mm per face; the confirmed full print has a loose lid. The coupons check registration, not a locking closure. If your coupon binds, increase the source parameter fit by 0.05 mm and regenerate the lid and coupons.

2. Import and print the body
Import these three files together as one object with multiple parts, keeping their shared coordinates:
File | Filament |
| Cream/white |
| Red |
| Dark grey |
Do not arrange the colour regions separately and do not use Split to Parts: the shutters contain separate islands. If the import dialog separates the files into unrelated objects, cancel and import the group again. The body has a 2.4 mm floor and 3.2 mm main walls; the deepest window recess leaves 1.95 mm.

3. Import and print the roof
Import these three files together as a second object with multiple parts:
File | Filament |
| Dark grey-green |
| Cream/white |
| Gold or roof colour |
Keep the complete roof upright. For a single-colour print, assign the same filament to every part of each object. Inspect the sliced preview before printing. The roof and body are the two finished prints; the two coupons bring the download to eight STLs and four physical prints when all are used.

4. Place the cover
Align the six star points and lower the roof onto the rim. It can register in six rotations. Lift it by two opposite roof edges, not the small finial. The lid is intentionally described as a loose cover: it can come off when the box is tilted or inverted. Use separate secure packaging for transport.

