Snap-On Basket for Sawyer Bikes Baby Ride
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap-on basket for the Sawyer Bikes Baby Ride. Prints in one piece without supports and clips on with no tools, screws,
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A basket for the Sawyer Bikes Baby Ride that snaps directly onto the bike — no hardware, no drilling, no modifications to the bike. Gives little riders somewhere to carry toys, snacks, and whatever they pick up along the way.
Key features
Snap-on mount – clips onto the Baby Ride's steering bar by hand. No screws, straps, or tools.
One piece – prints as a single part, no assembly.
Support-free – prints without supports. Supports are optional and only improve the surface finish on the inside floor of the basket.
Dedicated fit – designed specifically for the Sawyer Bikes Baby Ride.
Size – fits in all common printers
Material notes
The prototype is printed in PLA and works. For a bike that's stored outdoors, left in the sun, or carried in a hot car, PETG or ASA is the better choice: PLA softens around 55–60 °C and is more brittle, so the snap clips are more likely to crack or lose their grip over time. PETG also tolerates repeated snapping on and off better.
Print Settings
Min wall thickness: 1.2 mm
Infill: >20% adaptive cubic — perimeter count matters more than infill for snap-clip strength
Supports: No (optional, for a cleaner inside floor)
Recommended materials: PETG or ASA (outdoor/heat/UV, better snap-fit durability); PLA works for indoor or light use
Credits
Big thanks to CNC Kitchen (Stefan Hermann) for BumpMesh, which I used to apply the surface texture to the basket. Free, open source, and runs in the browser: bumpmesh.com