Anet A8 modular rigid camera bed mount for webcam and GoPro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was trying out some camera bed mounts for the Anet A8 but I always found the designs to wobbly and the vibration too…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 457
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I was trying out some camera bed mounts for the Anet A8 but I always found the designs to wobbly and the vibration too high while fast printing or if a heavier camera like a GoPro were used. I also wanted an easy way to disassemble for printer maintenance.
I hope my design is now meeting the requirements.
Since I am using a Microsoft LifeCam VX-700 Webcam the bracket and beam allows for an easy clamping fit for this webcam. All other adapter just need a 3,4mm thick plate, which can be clamped into the bracket or beam tightening it with the wing screw.
The setup can be a single bracket, which will support lighter cameras or a double bracket and beam setup for heavier cameras. If you need a higher point of you, you can use the extenders with 20mm, 30mm or 40mm.
Feel free to use the freeCAD model to tune the mount to your needs.
Post-Printing
deburring and tread-cutting
Required if you are also using the printed wings crew, might be obsolete when using a of the shelf M8 metal screw
FreeCAD
Model included
Category: 3D Printer Accessories