Traditional Assamese Jaapi Decor (3-Piece Modular Assembly / Multi-Color Print)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A beautifully detailed 3D printable replica of the traditional Assamese Jaapi (Jaapi hat/headgear decor)[cite: 16]. Desi
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Bring a piece of Assam's rich cultural heritage into your home with this 3D printable Assamese Jaapi (যপ / জপ)[cite: 16]! The Jaapi is a iconic traditional conical hat made of bamboo, cane, and tokou leaves, symbolizing pride, honor, and welcome in Assamese culture[cite: 16].
This model captures the signature woven bamboo geometric patterns, red/orange star motifs, and central dome while making it effortless to 3D print and assemble[cite: 16].
Key Features:
3-Part Modular Design: Built as 3 separate interlocking components (main woven mesh base, decorative star inlay, and central dome cap) so you can easily snap or glue them together after printing[cite: 16].
No MMU / AMS Required: Print each of the 3 parts in different filament colors (e.g., Red, Gold/Yellow, and White/Off-White) on any standard single-extruder 3D printer[cite: 16]!
Authentic Cultural Motif: Faithfully recreates the traditional 6-pointed star pattern and central crest found on decorative Fulam Jaapi[cite: 16].
Versatile Decor: Perfect for display on a desk stand, hanging on a wall, or using as a cultural showpiece during Bihu celebrations[cite: 16].
Assembly Instructions
Part 1 (Base/Mesh): Print the main circular woven lattice base[cite: 16].
Part 2 (Star Overlay): Print the decorative 6-point star motif and outer ring overlay[cite: 16].
Part 3 (Center Cap): Print the raised central dome piece[cite: 16].
Final Assembly: Press-fit or use a drop of superglue (CA glue) to lock the central dome and star overlay onto the woven base[cite: 16].
Recommended Print Settings
Filament: PLA / Silk PLA (Red, Gold/Yellow, and Ivory/Off-White or Wood PLA for the woven texture)[cite: 16].
Layer Height:
0.16mmor0.20mm(0.16mm gives crisp edges on the thin woven lattice strands)[cite: 16].Walls / Perimeters:
2 - 3 perimeters[cite: 16].Infill:
15% - 20%(Gyroid or Grid)[cite: 16].Supports: None needed! All parts print flat on the build plate[cite: 16].