Big Foot 9mm and 45 cal
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
**~~ USE AT YOUR OWN RISK~~** THIS MODEL IS EXPERIMENTAL
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 166
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
THIS IS AN EXPERIMENTAL MODEL ~~ USE IT AT YOUR OWN RISK.
This is a suppressor/silencer for .357/.457 caliber airguns. It is experimental. It may fail spectacularly. Use this design at your own risk. Feedback will be appreciated.
Print with an absolute minimum of 5 walls, 5 top layers and 5 bottom layers. Set infill to gyroid and 30% minimum. Use PETG or ASA for best results.
DO NOT USE A RESIN PRINTER ~~ DO NOT USE A RESIN PRINTER
There is only one attachment file provided. It will work for both the 9mm and 45 caliber. It will attach to an M18x1 thread (AirForce Texan, etc...)
THIS IS AN EXPERIMENTAL MODEL ~~ USE IT AT YOUR OWN RISK.
2026/09/30 Increased thickness to increase baffle strength.