SPconnect Powerbutton
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An improved reverse-engineered power button for SP Connect cases, redesigned to fix issue with the original part
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 197
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Open Community License v1.1 + GAtt v1 + RnD v1
I made this model because I was having a lot of problems with the power button on my case. The case has a very small gap between it and the phone, so it is quite sensitive when I ride. While driving, the button clicks repeatedly, turning off the phone or calling SOS by triggering emergency feature (five fast clicks). So, I came up with a solution: I made a replica of the button with more clearance so the phone will not trigger SOS or turn off while I am using navigation. Just keep in mind that I made this button especially for a Galaxy S26 Ultra SPC+ case, but if you have the same problem and the same button dimensions, you can use it too.
T3D_Design 2026