BETAFPV Meteor75 Pro Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for the BETAFPV Meteor75 Pro TinyWhoop
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
A two-part case (body + lid) for the BETAFPV Meteor75 Pro brushless whoop. I modelled it from scratch in FreeCAD, taking the idea from melnikod's Air65 TinyWhoop case, but sized it for the Meteor75 Pro, BETAFPV's largest 1S whoop with an 80.8 mm wheelbase and 45 mm three-blade props. It's built around the stock analog version with the C03 camera under the Micro Canopy, so the quad sits snugly and stays safe from bent props and cracked ducts while it rattles around in your backpack. I haven't tested it with the HD variants (Pro II O4, Pro P1), which have a different camera and canopy. The FreeCAD source file (.FCStd) is included and partially parametric, so you can adjust the key dimensions for your build and export your own version.
Tip: put a piece of kitchen sponge under the batteries so they don't sit too deep and don't rattle. You can also print a holder for them, but I prefer the sponge and keeping the batteries loose, which makes them easier to grab.
