Ray gun prop - print in parts for smaller printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This costume prop was remodelled in Fusion360 so that it could be printed on a MINI+ single filament printer.
- Ocena
- 5 / 5
- Polubienia
- 119
- Pobrania
- 389
- Wydruki
- 3
- Wyświetlenia
- 2106
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
WerkRaum's model (originally based on https://www.thingiverse.com/thing:2091732) is awesome, but I wanted one I could print in different parts rather than sand-and-paint.
This version was remodelled from scratch using that design as reference, and split into parts which would fit on the MINI+. It doesn't include the electronics and working trigger so is just a static prop.
3mf files include filament changes and supports where needed if opened in PrusaSlicer.
f3d file includes a parameter fit to adjust the gap tolerance where the pieces fit into each other.
Assembly
- primary colour
- print the body left and right and glue together
- print the handle and trigger and glue into place
- trim colour
- print the sides and fin and glue into place
- filament change - both colours
- print the antenna with trim colour and the tip in primary colour (or a bright danger colour if you prefer!)
- print the barrel+trim starting with trim colour and alternating filament every change.
- attach the barrel to the body and glue the rings/bauble to the other end
- attach the antenna to the barrel
- stand colour
- Optionally print the stand to give your model somewhere to sit until you need it.
License
As a remix closely based on but not using any actual part of another design, I've chosen to follow the CC-BY-NC-SA license chosen by that designer.