Skele65 - Skeleton Case for the XD68
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a very specific layout, with two 1.25u keys to the right of the space bar, and then a small blocker, and then…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a very specific layout, with two 1.25u keys to the right of the space bar, and then a small blocker, and then the arrow keys. Look up a WhiteFox if you're confused. My uploaded initial layout is also with a stepped caps lock, so if you're trying to use this with a standard caps lock it will not work - I have not cut the switch position to accept both. This also has the clearance for screw-in stabilizers, and if you use M3x10mm standoffs you should be golden on your clearance. Please also note that this is printed on it's face, that way you don't have to worry about supports for the switch retainer notch cutouts. This is printed one piece, so you'll either need to slice it in half using your slicer or you'll need a large volume printer to do it. I'll post pictures when I have the product finished.
Print Settings
Printer:
Heavy Machinery
Rafts:
No
Supports:
No
Resolution:
0.20mm
Infill:
20
Filament:
Stronghero 3D PLA
Voodoo Mystic Purple
Category: Electronics