Mustache Fan Cover - Altered for 2 color printing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I loved the mustache fan cover, but wanted it to be easier to print two color so I took out a ridge. Then a friend had…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I loved the mustache fan cover, but wanted it to be easier to print two color so I took out a ridge. Then a friend had mentioned that my screws looked like eyes, so I closed up the bottom screw holes and designed some eyes in Tinkercad. I love the look, I hope you do too! Eyes were printed in 3DSolutech Pure White, fan cover was printed in Amolen Firefly PLA, and the ginger parts were printed in eSun Jacinth Esilk PLA. Printed on a Kingroon KP3S (modified). I hope you enjoy it!
Print Settings
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
20
Filament: Amolen, 3D Solutech PLA
Category: 3D Printing