Dual Coffee Caddie
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was printed with a MakerBox sample. I typically get coffee for two, so I don't get a coffee carrier from the…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This was printed with a MakerBox sample. I typically get coffee for two, so I don't get a coffee carrier from the stand, but can still have trouble with my hands being full. So I made this, making it easier to carry two coffees at once without having one of them all over the lobby floor. I have two 20oz coffees in mine, so they're tight against the edges, but you should be able to fit any smaller cups in there as well. Enjoy!
Print Settings
Printer Brand:
TEVO
Printer:
Tornado
Rafts:
No
Supports:
No
Resolution:
0.20mm
Infill:
20%
Filament: Printed Solid PLA Jessie PLA Red
Category: Kitchen & Dining