Tello Drone removable LED rigging
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted a removable LED setup for my Tello, so I printed this up and soldered some LEDs in with some wiring. The printed pieces are not glued, but only held firm with zipties for right now as this is still the beta test for me. Any suggestions are welcome, but so far I'm loving this thing!
You can use the micro-usb end of an OTG cable and wire into the red and black wires of it to power the LEDs when the Tello is powered on. You do this at your own risk - I am not responsible for any damage you do to yourself or your property!
You will want to take a heat gun or blow dryer to shape the "H" piece (dropping down the edges so they wrap around the top of the Tello) and then use some super glue to connect the mount piece to the H bracket.
Print Settings
Printer Brand:
TEVO
Printer:
Tornado
Rafts:
No
Supports:
No
Resolution:
0.20mm
Infill:
20%
Filament: Ziro PLA Transparent Green
Category: R/C Vehicles