Shopping Cart Hook for Rolser Com 8 Trolley
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hook to hang a Rolser Com 8 shopping trolley on a grocery cart by its lid grab bar.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
How it works
The top of the hook wraps over the cart's top rim wire, with a short leg that drops inside the basket between two vertical wires. This keeps it from popping off or sliding along the rim. The bottom is a U channel that the Com 8's flat lid grab bar drops into. The fit is snug, so the trolley stays in place on its own.
Fit
Designed for the Rolser Com 8 (Stealth) lid grab bar, 22.3 x 6 mm. Tested on standard wire grocery carts with a 5 mm rim wire and vertical wires spaced every 30 mm. Carts with thicker or coated rims may need adjustment.
Printing
Material: PETG recommended (better impact and heat resistance than PLA for something that lives in a parking lot)
Orientation: lay it flat on its side so the layer lines follow the hook shape. This is important for strength.
4 to 5 perimeters, 30% gyroid infill
No supports needed
Meant to hang the trolley empty (or lightly loaded) while you shop.