Bar and G_Clamps Otherwise called Vice
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clamp attachments for workbench or sawhorse. Please help make these clamps at 90 degrees when holding workpiece. Thanks.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 1
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
As you see this side is rounded might fit a pulley whatsoever, might as well make a crank handle (yes a geared-driven Moxon vise otherwise as you wish) or servo-motorized clamp. Bearings are essential for this whereas this is a vise anyhow working at your progress. Tap borehole first.  |
|---|
PLUS (definitely NOT made for trigger) Rubber sleeves are for grips, otherwise use nails as these are for end stops, make four in total otherwise as many as you like for stock up.  |
Equals these, I guess these are finished products otherwise as you wish (obviously I was right according to these results yup no trigger there).  Otherwise this  |
SlotNut and profile are both provided, otherwise do as you wish. Make sure purchase leadscrews or dowel rod at your local hardware stores to complete this project tool.
Thanks