FrameDS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A dual screen handheld using the Framework 12 mainboard and battery
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here's my design for a dual screen handheld using the Framework 12 hardware! This is a work in progress, files will be updated as the project develops.
NO AI was used in the development of this design.
Design Information
This project stemmed from my desire to have a beautiful large Nintendo-style handheld device that supports dual screen action. Have you ever just wanted a BIG DS? I have, clearly.
This project uses 2x 7 inch raspberry pi screens and switch joysticks. The original Framework battery pack is used, with a custom battery connector extension allowing a stacked format. I will be listing the hardware I plan to use for this project in the next section. This design uses spring detents to perfect that beautiful clicky clamshell action that we all miss dearly.
Follow along with my design on Onshape:
Highlighted Features
Spring detent hinge
Integrated flexure joint power button
Framework logo fan grill
Externally accessible USB-C
Integrated shoulder buttons
Integrated controller PCB
Hardware List
Amazon
https://a.co/d/0eYrk4Xu Non-Touch Display (Top Screen, affordable option)
https://a.co/d/0fFdaXzM USB-C converter for HDMI Display and USB
https://a.co/d/06WX8Pni Rear-mount Bottom Display
Aliexpress
https://www.aliexpress.us/item/3256809273976416.html eDP to HDMI converter
https://www.aliexpress.us/item/3256806697781619.html Battery Connectors (6 position Male & Female)
https://www.aliexpress.us/item/3256804963629050.html Spring Detents (M6 x 8mm)
Future Plans
I plan to continue the development of this design, mainly focusing on the specific controller arrangement and the accompanying PCB. The PCB is not necessary, but will make assembly much more streamlined.
I will be extensively testing the hinge durability and feel to get it just right. (This is very important to me)
I will be making this functional with various configuration of 7 inch displays to allow customizability.
3D printed buttons might work, but for a more polished look, I will be designing versions of the shell that allow for controller replacement buttons to be used.