Camvac Defender wallmount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for the record power Defender 150l Camvac
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I was less then impressed with the wall mount options that Record power included. It is incredibly flimsy and the cyclone only has a single point of connection with the wall.
Considering how much force a 3 motor Camvac can produce when attached with a flexhose, i was destroying the wall and the defender was never straight.
This is intended and verified that it works with Record power camvac Defender 150l, but should also work with any camvac that is 150l.
Mounting:
Make sure to fix the top mount right under the lip. This makes sure that the Cyclone cannot slip down during use.
Filament choice:
There is no real load on the filament, both PLA and PETG is more then strong enough.
Parts:
2 loading straps without hooks.
Example: https://www.ikea.com/se/en/p/frakta-loading-strap-with-buckle-black-79306696/
There is similar available on Amazon