1 / 3
Tamron SP 300mm f/2.8 Lens Hood (60B) — zdjęcie 1
1 / 3

Tamron SP 300mm f/2.8 Lens Hood (60B)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Twist on lens hood for a Tamron SP 300mm f/2.8 LD (IF) lens

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
15
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution

The model has supports the Tamron SP 300mm f/2.8 (LD) IF Model 60B lens

It uses the same twist on connector as the lens cap that i also posted but slightly modified.

The hood includes internal baffles to prevent light bouncing and does not cause vignetting according to my testing

I printed this at half of the default speed using bambu labs petg, no supports and would recommend anyone else printing this to do the same for at least the last hour of the print

This is designed to print without supports when placed on the bed with end of hood on the bed. If you want the best quality you can print with supports for the overhangs at the bayonet connection

The pictures show multiple lengths of hoods which is possible by simply cutting the model in slicer to desired length. The pic with longest hood is the default model.

Tagi