Dive Compass Boot - XS Scuba SuperTilt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting boot compatible with the XS Scuba SuperTilt compass module.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 54
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was tired of having bulky compasses snagging on my gear, and after much searching determined there was only one thing to do - fix it myself!
This boot was made to fit the slimmest compass I could find, the XS Scuba SuperTilt compass module.
I recommend printing this in TPU. To assemble, simply press the compass into the boot. Use 4mm marine-grade shockcord to create a finger and wrist loop - you can either use two independent loops, or use a continuous loop for a bit more adjustability by threading the cord through the inboard holes.
Enjoy!