1 / 2
Anderson Power Poles adapter for bench power supplies.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a simple little shell to take a couple of binding post plugs and adapt them to Power Poles.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple clamshell to hold two binding post plugs and a set of Power Poles. I used the old style plugs that came with a screw on plastic cover. Remove the cover and the screw threads will be clamped into the shell.
Simple enough. There are two halves so when assembled the + symbol will be on the same pole on both sides. The screw pockets and holes support M3x4mm screws.