Victor Zap Trap Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Outdoor enclosure for Victor electric mouse trap
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an enclosure I designed for a Victor electric mouse trap in order to be able to keep it outdoors. Specifically model M250B, but other similar size traps should work
Features:
Off center entry way with L shaped corridor to prevent outside elements from going straight in
Elevated rails to place mouse trap on to keep it off the bottom, if water should happen to get in
Drain holes in bottom/back to allow for water drainage without exposure to outside elements
Easily removable roof to place/remove trap
This is intended to use outdoors, but I'm not your mom.
If using outdoors, this should be printed with PETG at minimum, best option is ASA for UV resistance. If wind is a concern, you could just place a rock or something on the roof to hold it down.