Vertical Grip with cold shoe for Revopoint Pop 4.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple vertical grip for the Revopoint Pop 4 3D scanner with cold shoe and 1/4" thread access.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I found holding my Revopoint Pop 4 like an umbrella feel cumbersome so I made a case that allows it to be held vertically or horizontally from the rear of the camera.
This build requires:
4x M3x16mm socket head screws.
4x M3 4x4.2 threaded heat set inserts.
130g filament.
Print the main case on its backside and the handle with the chamfered side down. 3+ walls and 15%+ infill.
The stock USB cord with the strain relief screw is a little wide to fit through the handle, I use a battery pack and a 8" cord without this feature but you can still use the stock cord if you feed it through the case and handle before pressing the scanner into the front of the case.
Big thanks to @printedforfun for his fantastic 3d scan of a 3d scanner!