Camera mount for Arducam OV2710 module
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A very basic 2020 camera mount for Arducam OV2710 camera module.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
This is a very basic mount for Arducam OV2710 camera module (also known as also known as Arducam 1080P Day/Night Vision USB Camera).
It works as expected and has a good enough FOV to see what's going on.
BOM-
2x M5x8mm button head screw to mount the assembly onto the extrusion.
1x M3x25mm socket head screw to screw together the mounting arm and the body. Longer also works.
2x M5 T nuts
1x M3 hex nut
4x M2 self tapping screws to mount the module into the body (VORON BOM)
The lid is friction fit, so no additional hardware is needed to mount it.
I have printed it with standard VORON print settings in ABS to avoid deformation of the mount.
STLs are pre oriented (to best of my efforts) but please double check the orientation before printing.
You may need to trim front edges of your electronics deck panel for the camera cable to pass through.