1 / 6
Promethium Line · 3 Artillery Craters to Glue onto Your Gaming Mat · 28–32 mm Grimdark Wargaming Terrain — zdjęcie 1
1 / 6

Promethium Line · 3 Artillery Craters to Glue onto Your Gaming Mat · 28–32 mm Grimdark Wargaming Terrain

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Three one-piece shell craters with oil-filled floors and a 0.4 mm rim that blends into your mat with sand.

Ocena
0 / 5
Polubienia
4
Pobrania
9
Wydruki
0
Wyświetlenia
62
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

### Scars of the fight for the source

K-01 to K-03 are three artillery craters from the battle for the drill station and the refinery. Each has a jagged rim with upthrown clods, scree, shrapnel and ejecta rays, a charred inner slope and a level floor where promethium collects. Debris from the plant lies in them: a shell casing and a soldier's helmet in K-01, a torn I-beam and a blown-off red handwheel in K-02, and in K-03 a feed line ripped out of the ground, with a flange pair, a hazard band and oil running down the slope, next to a red drum. They are made to be glued onto your mat and blended in with sand.

### Features

- K-01 shell crater: 104.0 × 94.0 × 10.0 mm
- K-02 glancing hit, with a plough furrow from the left: 150.0 × 108.0 × 13.8 mm
- K-03 heavy impact: 198.0 × 158.0 × 14.4 mm
- 416.5 cm² terrain area for all three, highest point 14.4 mm (below 1″)
- One piece each: debris, pipe, drum and name plates are printed in place
- Only the outermost 1.2 mm strip of the rim is 0.2–0.4 mm thin with modelled sand texture, so it disappears under sand
- Wide flat glue underside, more than 97 % of each outline
- Solid floor 1.8 mm above the table, no opening to the mat
- Each crater has a level standing area of at least 46.4 mm, checked with a 40 mm base
- Loose rules card

### Game use

Rules for Warhammer 40,000, 11th edition. Unofficial fan-made terrain. Not affiliated with or endorsed by Games Workshop. Warhammer 40,000 is a trademark of Games Workshop Ltd.

- Category: Exposed (suggested, agree before the game).
- Terrain area: each printed outline including the sand lip is one terrain area, also after you blend it in with sand.
- Levels: none.
- Objective piece: no.
- Cover: INFANTRY, BEASTS and SWARM in a crater get the Benefit of Cover. Exposed terrain gives no Obscuring and no Hidden.
- Terrain action: none. Oil, pipe and debris are scenery only.

### Print settings

- PETG, 0.4 mm nozzle, 0.2 mm layers
- 3 perimeters, 4 bottom / 5 top layers, 15 % gyroid, 240 °C nozzle / 80 °C bed, fan 30–50 %, bridge fan 100 %
- No supports, no brim. The thin rim lip lies directly on the bed. Every debris part is shaped to print without supports.
- 3 printed parts on 2 plates

Print time and filament (PrusaSlicer 2.9.6 estimate, heat-up not included):

- A · K-03: 5 h 24 min · 59 g
- B · K-02 + K-01: 4 h 29 min · 48 g
- Total: 9 h 53 min · 107 g

### What else you need

- A glue that suits your table surface and bonds to PETG. Test it on your actual mat first.
- Fine sand with a matching binder, and paint
- No magnets, dowels or screws

### Gluing and painting

- Dry-place all three craters first and mark or photograph the positions. Each outline is its own terrain area, whatever the distance between them.
- Clean the flat undersides and glue them down with full-surface contact, so the craters do not hang on the thin rim lip.
- Blend only the outer lip in with sand. The visible crater rims stay clearly recognisable.
- Paint the level floor, the open pipe channel and the gully under the break black and gloss-varnish them. The oil shine is paint.
- Keep the loose rules card next to the table. Do not put a card under a glued-down crater.

### Works with the rest of the set

Promethium Line is a coherent terrain set in ten modules with one story. The mountain is the promethium source, drill station D taps it, and the pipeline H carries it past pipe bridge A and buffer tank B to the refinery with tower E and the bombed tower turned drill rig F. Loading yard G closes the chain. Craters K, the tanker wreck C and field defences J show the fight for it.

The large table plan uses two sets of craters, six pieces, glued at fixed places. Lay them down dry first and only glue them once both play areas are fixed. See the Promethium Line collection for all modules.

### Files

- Model files: crater_01.stl, crater_02.stl, crater_03.stl, plus one PrusaSlicer 3MF project per print plate, named job_<plate>_….3mf (A, B). There is no G-code. Slice the 3MF projects with your own printer profile.
- Other files:
- rules_card_K.pdf: one loose rules card for all three craters, 85 × 54 mm
- TABLE_RULES_card.pdf: one card for the whole table (Core Rules reminder, objectives, terrain actions), two sides
- BUILD_GUIDE_K.pdf: dimensions, print plates, gluing and painting steps
- RULES.pdf: all set rules in full, with Core Rules references and the balance maths
- source_K.zip: the parametric source code, to change the craters and rebuild every STL
- Print all cards at 100 % (no page scaling). The Table Rules card has two pages: cut them out and glue them back to back.

### How it was made

Designed with AI assistance as parametric Python CAD code (build123d / manifold3d) and checked by automated tests: watertight meshes, overhangs of at most 45°, no free-hanging bridges, standing areas, solid floor and glue area, and a PrusaSlicer run for both plates. It has not been test-printed yet. Flatness, the strength of the two-layer rim lip and gluing on a real mat are not proven, so try one crater on your surface first. Makes and feedback are very welcome.

Tagi