1 / 1
House Plant Castle Pot with Moat — zdjęcie 1

House Plant Castle Pot with Moat

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

80mm x 125mm castle pot with moat

Ocena
0 / 5
Polubienia
4
Pobrania
10
Wydruki
0
Wyświetlenia
44
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

My Chlorophytum comosum needed a new pot so I designed this little castle in Onshape. The pot is 80mm in diameter and about 125mm tall. the moat around the pot is attached and is 130mm in diameter. Drain holes drain excess water from pot into moat acting as a reservoir for water. 

Printed in PLA, will be fine for indoor use as long as it isn't by a window that gets too hot.

Tagi