Pen & Book Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3 Part holder for books, pens, and other stationary you might have lying around!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
Pancake's Book and Stationary Holder
Overview
Hi! This print consists of 3 parts, all of which are mandatory to print (they CAN be used as is but are much better with all 3)
This print requires four 15x2mm neodymium magnets, which are supposed to be attached with hot glue / a strong adhesive
Total print time: ~12h30m
Total Filament: ~450g
Material: PLA (Others can also be used)
Printing Guide
Print all 3 parts. The neodymium magnets go into the following slots, which are shown in pairs (i.e: one +ve and one -ve pole)
MISC
The book holder is also meant to be used as a bookmark - keep the book spine facing up and the stand in between the pages.
The pen stand is bidirectional, it can be placed with the flat side facing outward or inward, provided that the magnet is attached properly.