Creator 5 Pro Exhaust Carbon Filter Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add four compact Anycubic carbon filters to the Creator 5 Pro exhaust with this adhesive-mounted adapter.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Exhaust carbon filter adapter helps remove SOME ABS and ASA odor.
A compact adapter for adding four replaceable Anycubic activated-carbon filter inserts over the Creator 5 Pro exhaust. It supplements the printer’s internal recirculating filter by adding carbon media at the otherwise-unfiltered exhaust outlet.
The four inserts slide into the printed housing, which mounts over the exhaust grille using VHB-style double-sided tape or a similar suitable adhesive.
Printing
Printed and fitted in PETG. PETG or a suitably heat-resistant material is recommended over PLA.
Print faced down. 0 Supports needed.
Parts and installation
Print one adapter and obtain four matching Anycubic replacement activated-carbon inserts plus suitable mounting tape.
With the printer off and cool, slide all four inserts into the housing.
Clean and dry the mounting surface according to the tape manufacturer’s instructions. Apply tape to the mounting flange without covering airflow openings.
Align the housing over the exhaust outlet and secure it. Follow the tape’s bonding instructions before use.
Check filter retention, exhaust airflow, and spool clearance before printing.
Spool clearance
The original spool holder still fits in the demonstrated setup, but clearance is tight. Check your spool’s full rotation and filament path; a holder with greater stand-off may be useful.
Limitations
Activated carbon may reduce some odors and gaseous pollutants, but VOC removal and airflow have not been measured for this adapter. It is not a HEPA filter or a substitute for adequate ventilation, particularly when printing ABS or other emitting materials. Reduced odor does not establish safe air quality. Monitor airflow and chamber temperature, and replace the inserts according to their manufacturer’s guidance.
Creation notes
Designed, printed, and photographed by me. AI assistance was limited to light photo touch-ups and listing copy. The model design and photographed details are human-made.