Snapmaker U1 HSW build plate holder, 5 slots
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snapmaker U1 HSW build plate holder, 5 slots, scaled to fit the Snapmaker U1
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
I scaled the step file from the original project in Fusion to fit the Snapmaker U1 build plates, removed the indents for the stand, added 5 attachment hexagons for HSW. The "insert-empty.stl"part is from this project, which gave me the idea to make a 5 slot version.
I added step and fusion files in case somebody wants to adapt it further.
Printing:
You have to rotate the part by 45 degrees to make it fit on the build plate of the U1, see included screenshot. Use your preferred filament and settings. Supports are only necessary for the upper hexagon, I used snug supports, see screenshot. The "serious warning" in Snapmaker Orca about it being too close to the bed boundary can be safely ignored, it will print just fine.