Backup Camera Drip Hood (fits Honda Ridgeline)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small hood for the backup camera - intended to keep rain from dripping onto the camera. Fast print, no supports!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 1
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
Recommended print settings:
Material: PLA/PETG
Layer Height: 0.20
Infill % : 15+
Supports: No
Print Orientation: Two options -
As modeled:
Or vertically:
I attached this with a command strip cut to match the profile (these pictures are from an earlier design):
Use this model at your own risk.
This model is provided as-is. The user is solely responsible for determining whether the printed part is suitable for their vehicle, camera, installation, and intended use.
The user accepts all responsibility for the printing, installation, modification, and use of this model, including any resulting damage, injury, accident, loss, or other consequences.
Before using the vehicle, the user is responsible for verifying that the installed part does not interfere with the backup camera or any other vehicle function.
The designer assumes no responsibility or liability for the use or misuse of this model.