Druid cosplay horns with attachment method
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3 pairs of druid/forest spirit horns in varying sizes
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 227
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a model of 3 different pair of horns I made for my project! They were meant to look something between a branch and goat horns, I painted mine with acrylics based on actual horn references!
They are made to be glued to a rubber loop that can be then slid onto a headband. I used hot glue and it held on just fine but if you're afraid of it falling off use a glue specifically for plastics. The bottom of each horn has been textured to make it easier for the glue to grip.
I printed it using PLA on 1.5 structural with organic supports on build plate only and a brim
Approx. sizes:
Pair | Width x depth x height | Foot | Weight of each horn |
|---|---|---|---|
Major | 82 × 82 × 211 mm | 41 × 40 mm | 48 g |
Minor | 41 × 39 × 119 mm | 25 × 25 mm | 13 g |
Thorn | 18 × 22 × 58 mm | 16 × 15 mm | 3 g |
Happy printing!