1 / 3
Rigid 18V Battery Holder Carrier 4 Packs — zdjęcie 1
1 / 3

Rigid 18V Battery Holder Carrier 4 Packs

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a one piece Rigid 18V battery holder.

Ocena
0 / 5
Polubienia
7
Pobrania
19
Wydruki
1
Wyświetlenia
71
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

One solid piece Rigid 18V battery holder for four battery packs.

I designed the battery holder in Autodesk Fusion in the imperial system.  I 3d printed the STL file in mm for Creality Print.

I have uploaded the STL, F3D, and 3MF files to ease any changes.  By no means am I a pro designer or 3D printer.  I only know just enough to be dangerous. :-)

I printed with 0.2mm layer thickness in PLA.

Printed on a Creality Ender 3 S1 Pro.  It took just over 24 hours with print speed set to 100mm/s with slower bottom layer.  I printed with 4 top and bottom layers and 4 sidewalls.  I also used a 10% cubic infill.

I needed to print with supports for the top handle and the vertical holes.  You might be able to get away without supports in the vertical holes, try that at your own risk.  The Vertical hole supports were easy to pop out.  I had to cut the top and bottom edge on the handle support.  It did come out pretty clean requiring minimal cleanup.

The batteries fit my print very well.

Tagi