Drayton Wiser Hub v2 back plate shim
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The supplied back plate does not have sufficient clearance to allow cable joining. This shim helps.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The new Drayton Wiser v2 hub is supplied with a backplate with limited space for cable joins. This means that you generally need to feed it from a single cable and make any joints elsewhere. Whilst this may suit new installations it can be difficult when replacing existing installations without replacing all the cables.
This model provides a shim which fits behind the back plate lifting it 15mm and providing a void where cable connectors, like wago 221 will fit without compromising the seating of the hub.
Various mounting holes are provided to allow the shim to be installed separately to the back plate. There are also cable apertures in the shim which can be opened to allow cables to pass into the wiring void. The mounting plate is then installed onto the shim and cables can be connected to the backplate.
I printed the shim using ASA with 10% Carbon Fiber with 30% infill but really any engineering filament will be sufficient because there is unlikely to be any load or environmental constraints on this shim.